Skylight Installation in Diamond Bar, CA

Many Diamond Bar homes have deep hallways, interior bathrooms and stairwells that stay dim all day, even with Southern California sun outside. We install skylights in Diamond Bar, CA with flashing built for tile and shingle roofs, so you get the daylight without the leaks or the heat.

(909) 324-6458

Get a Free Estimate

Tell us about the roof. Only your name and phone are required.

Form powered by splitforms

Two new low-profile skylights set into a brown concrete tile roof on a hillside home in Diamond Bar, CA

Why skylights make sense in Diamond Bar

Most of Diamond Bar was built from the 1970s through the 1990s as tract homes climbing the hills between Grand Avenue, Diamond Bar Boulevard and Brea Canyon Road. Those floor plans often have long interior halls, windowless bathrooms, walk-in closets and stairwells in the middle of the house. A well-placed skylight or a tubular daylight device can turn a dark space bright for most of the day.

The catch is that skylights are one of the most common sources of roof leaks we see, usually because of poor flashing or an old unit whose seals have failed. On the hillside roofs here, which are often concrete tile with several levels and valleys, installation details matter even more.

Types of skylights we install

Fixed skylights. Sealed units that let in light only. Good for halls, family rooms and vaulted ceilings.

Venting skylights. These open, manually or with a motor, to let hot air escape. They work well in bathrooms and kitchens and can help with summer heat that builds up near the ceiling. Some models close automatically when rain sensors detect water.

Tubular skylights. A small dome on the roof and a reflective tube bring light into a closet, bath or laundry room without framing a new opening. They are quick to install and easy to fit between rafters.

Glass that handles the heat

Inland Southern California summers are hot, and a clear, single-pane skylight can make a room feel like a greenhouse. We use dual-pane, low-E glass that cuts heat and UV, which also helps keep furniture and floors from fading. California's Title 24 energy code sets performance requirements for skylights, and the products we install are rated to meet them. Tinted glass and light-diffusing shades are options for south- and west-facing roofs.

Roofer fitting metal flashing around a new skylight curb on a tile roof in Diamond Bar, CA

How we install a skylight

  1. Plan the opening. We check the attic, the rafters or trusses, wiring, ducts and where light will fall in the room.
  2. Open the roof. On tile roofs, we lift and save tiles around the area. On shingle roofs, we remove only what we need.
  3. Frame and set the curb. Rafters are headed off properly, and the skylight is set on a curb or deck mount that fits the roof type.
  4. Flash and waterproof. New underlayment, a manufacturer flashing kit and sealed laps tie the skylight into the roof so water is directed around it.
  5. Re-lay tile and finish inside. Tiles are cut and reset around the unit, and the light well is drywalled and ready for paint.

Replacing old skylights

Many homes here still have original acrylic bubble skylights. Over time the plastic yellows, cracks and lets in heat, and the old flashing starts to fail. Replacing them with modern units usually fits in the same opening, and it is a good time to refresh the underlayment around them. If an old skylight is already leaking, see our roof leak repair page.

Wind, rain and wildfire

Santa Ana winds can gust hard through the canyons in fall and winter, so we secure units and flashing to handle uplift. Winter storms are short but can be heavy, and water finds any weak point around a curb. Parts of the Diamond Bar hills are in fire hazard zones, and for those homes we talk about tempered glass and keeping the area around skylights clear of debris.

Skylights and attic heat

A skylight changes how heat moves through the attic. Light shafts need insulation around them, and a hot attic makes any skylight work harder. Pairing a new skylight with better roof ventilation keeps the space under the tile cooler.

Common questions

Will my HOA need to approve it? Some gated communities, such as The Country Estates, review roof changes. We can provide product sheets for the request.

How long does an install take? A tubular skylight is often done in a few hours. A framed skylight usually takes a day or two, plus drywall finishing inside.

Do skylights work with solar panels? Yes, as long as we plan around the array. We check panel layout and shading before choosing a spot.

Can you add a skylight during a reroof? Yes, and it is the easiest time. Ask us when you book a roof inspection.

Talk to us about a skylight

Call (909) 324-6458. We will look at the room, check the roof framing above it and send a written price with options.